Ref: http://absoblogginlutely.net/2011/03/fixed-server-continually-boots-into-safe-mode/
- restart the server in safe mode with command prompt
- run the following command to delete the safe mode key from the boot config
bcdedit /deletevalue safeboot
- reboot server
shutdown -r -t 0
Friday, August 17, 2012
Wednesday, May 23, 2012
Cisco ASA IPSec VPN Client Access Configuration
ip local pool VPN-POOL 10.0.0.193-10.0.0.206
access-list VPN_splitTunnelACL standard permit 10.0.0.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.0.192 255.255.255.240
nat (inside) 0 access-list inside_nat0_outbound
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-3DES-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime seconds 28800
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp identity hostname
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
group-policy VPNGROUP internal
group-policy VPNGROUP attributes
dns-server value 8.8.8.8 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPN_splitTunnelACL
tunnel-group VPNGROUP type remote-access
tunnel-group VPNGROUP general-attributes
address-pool VPN-POOL
default-group-policy VPNGROUP
tunnel-group VPNGROUP ipsec-attributes
pre-shared-key 12345678
Subscribe to:
Posts (Atom)